The GGR forum has reached it's end, but posts are still available read-only for posterity. We invite you to make posts and discussions on the GGR Facebook page.

Driver door window drop-down function-Boxster

Use this forum to discuss car maintenance, building track cars, and modifications

Moderators: David Leong, Andrew Forrest

Post Reply
drive2slow1882
Posts: 2
Joined: Sun Dec 13, 2009 4:13 pm

Driver door window drop-down function-Boxster

Post by drive2slow1882 » Sun Dec 13, 2009 5:04 pm

have problem with window drop down feature (release) when door is opened. When the latch is pullled, window releases from the seal but pops right back up when the latch is released, so when the door is closed the window glass is still in the full up position and runs into the seal. Any ideas or suggestions?

Ken Jones
Posts: 253
Joined: Tue Jun 21, 2005 3:07 pm
Location: Pleasant Hill

Re: Driver door window drop-down function-Boxster

Post by Ken Jones » Sun Dec 13, 2009 5:19 pm

The first thing to try (may be in the owners manual?) is to cycle your windows full up and down and hold the button down for 10 seconds at each position. It may require 2-3 cycles. The theory is that the system "re-learns" the up/down positions. May - or may not work.

I've had a glitchy drivers window for several months and never got around to doing anything and then, it started working again... so, I'm guessing a faulty connection.

The "mind" of the drop down feature is in the register control motor I believe. It's not cheap to have someone do it.... from $450 - $600.

Here's a link to Renntech. They have lots of discussions about things breaking. The link I'm sending you to is via their "search" engine.

Good luck,

kj

http://www.renntech.org/forums/index.ph ... +drop+down
#44, '73 911 E Targa - AX10

User avatar
PAUL LARSON
Posts: 190
Joined: Mon Aug 14, 2006 3:30 pm
Location: SAN CARLOS
Contact:

Re: Driver door window drop-down function-Boxster

Post by PAUL LARSON » Mon Dec 14, 2009 2:17 pm

I just bought the part for $115. I wanted to put it
in this weekend but it was to wet. It is a switch
in the latch mechanism that holds the door
closed. If you check the 997 DIY at Renntech,
I will post what I did. May be after christmas
until I do the work.
I found a neat way to close the door. You hold the outside latch up
just a little. Then you swing the door close releaseing the
latch when you are about 12 inches away.
Paul

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest